Table of Contents
Advertisement
12 | Kitchen management
Connecting units with ConnectedCooking.
n
12.3.1
Connect network cable
Your unit is optionally equipped with a network connection. To connect your unit to the network and to protect
the unit from water jets from all sides, use a network cable with the following properties:
Network cable category 6
n
Maximum plug length of 45 mm
n
Plug diameter of 18.5 mm
n
Cable diameter of 5.5 – 7.5 mm
n
The functional parts around the network connection can heat up to over 60 °C
You can burn yourself if you connect a network cable to a unit that is currently in use or has just been in use.
1. Let the unit cool down before connecting the network cable.
1. Unscrew the protective cover.
2. Thread the individual parts of the protective cover onto the network cable.
3. Plug the network cable into the network connection.
4. Screw the protective cover back on.
12.3.2
Establish network connection
a
You have all the data for the network connection.
1. Press the button
2. Press the button
3. Press the button
4. Press the button
5. Enter the IP address.
6. Press the button
7. Enter the IP address of the IP Gateway.
8. Press the button
9. Enter the IP netmask.
10. If you would like a server to assign the network configuration to customers, activate DHCP. Press the button
ON
>
Now the IP address, Gateway and DNS are automatically configured.
11. Press the button
12. Enter the address of the DNS server.
72 / 92
Network settings
LAN
IP network
IP Gateway
IP Netmask
DNS 1 (preferred)
CAUTION
Operating instructions
Advertisement
Table of Contents
