Download Of Unit Service Data - Rational SCC Series Training Manual

With this function all actual valid service data of the diagnose program can be download-
ed onto a stick. This can be done during an active process or also if the unit is in standby (unit
must be switched on). To get all data the download should be done during an active process.
The maximum number of download's on one SCC is 4 times within one our.
Info
I01, S01
log
The file RAG_xx_yy_SERVICE.txt
a) Common Information
b) Basic settings
c) Diagnostic
d) Running Times
e) System Error Logger
f) Gas Error Logger Burner Control 0
g) Gas Error Logger Burner Control 1
In case your servcie call is subject to an unkonwn error and / or the error is sub
ject to application problems please always download also the HACCP data!

Download of unit service data

Connect USB Stick to unit interface. If the stick is recognised it
will be shown as a blue stick symbol right of the download key.
Touch key. During the Download-process the colour of the stick changes
from blue to red and on the key in the symbol running lines are visible.
If the download-process was ¿ nished successfully then the colour of the stick
changes from red to blue and a tick is shown underneath the stick symbol.
Additional I, S (I01; S01) and the actual number of downloads are indicated
The following data can be found on the stick after connecting it to a PC:
On the stick the folder „log" can be found.This folder contains txt- files.
RAG_xx_yy_STAT.txt
RAG_xx_yy_SERVICE.txt.
xx: Serial number
yy: Date of Download
The files contain the service datas which are appropriate at the moment of
the download.
The file RAG_xx_yy_STAT.txt
esses (SCC-process, customer program's, CleanJet and manual proc-
esses)
The ¿ le RAG_xx_yy_SERVICE.txt contains all relevant servcie data
(The file RAG_xx_yy_APPLOG.txt
is partitioned into the following block's:
Edition 10-2008a
and
shows the frequency of usage of the proc-
is not relevant for service)
SCC
101