Maintenance and service
8.2 Maintenance
The figure below shows the positions of the fans and filter mats.
Figure 8-1
NOTICE
Electrical hazards
The charging station uses 400 V AC supply voltage. Touching live parts may cause electric
shock and could be fatal.
Work on the electrical installation may only be carried out by skilled electricians and when
the power supply is disconnected.
The charging station is switched off via the load breaker switch. Activation is not possible in
the charging station. De-energize the supply line.
90
Fans and filter mats
SICHARGE Operating instructions, ERK
Operating Instructions, 07/2020, A5E48571690-AB