Logon To The Console - Planet MGSD-10080F Quick Installation Manual

5. Logon to the Console

Once the terminal is connected to the device, power on the Managed Switch and
the terminal will start running testing procedures.
Then, the following message of the login username and password appears. Both
the factory default username and password are "admin" as the login screen in
Figure 5-1 appears.
Username: admin
Password: admin
Figure 5-1: MGSD-10080F Managed Switch Console Login Screen
1. For security reason, please change and memorize the new pass-
word after this first setup.
2. Only accept command in lowercase letter under console inter-
Note
face.
8