Table of Contents
Advertisement
Before Installing the Product
WARNING
• When installing the product on vehicles installed with an air bag, never install on the cover of the air
bag and at locations that might obstruct the deployment of the air bag. Doing so might prevent the air
bag from being deployed normally, cause the product to fly out due to air bag deployment, and cause
accident and injury.
CAUTION
• First check with the vehicle manufacturer for precautions related to the installation work when installing
the product in a vehicle equipped with airbags. Otherwise there is a risk of airbag malfunction.
• Always use the included parts as specified. There is a risk of product failure if other parts are used.
• Install this product in a location where it will not hinder vehicle equipment and the ability to drive the
vehicle.
Installation Precautions
• This product is for installation to the inside of the front windscreen only. Do not install it anywhere else
inside or outside of the vehicle.
• When installing this product on the front windscreen, be sure to install it to the specified positions of
the front windscreen and within the specified dimensions.
• Depending on the vehicle, installation at the specified location and within the specified dimensions
may not be possible. For details, consult with your dealer.
• Do not cover this product, or get the lens dirty.
• Do not place reflective objects near the lens.
• Take care when handling this product so that it does not drop and you do not touch the lens.
• Recording quality may be affected if the front windscreen of the vehicle is coated or has been specially
treated.
• This product may not be able to receive GPS signals if the front windscreen of the vehicle has been
specially treated. Check the GPS reception status indicator displayed on the screen of this product.
If a GPS signal cannot be received, this product cannot be installed in this vehicle. →
product" - "Status Display"
• Choose a working location free from dust and debris in the air.
• When the temperature is low or there is condensation on the glass, turn on the heater and defroster to
warm up the window in order to prevent poor adhesion of the double-sided tape.
Double-sided tape cannot be re-applied once it is peeled off as peeling off weakens its adhesive
strength. Be sure to temporarily fasten this product and sufficiently consider routeing of cables before
applying double-sided tape.
Installation Tips
Before Installing and Securing the Product
• First, temporarily connect this product and confirm that it operates correctly, and then install it. If the
product does not operate correctly, check again if there is a mistake in the connection.
Before Applying Double-sided Tape
• Clean the location where the double-sided tape will be applied.
− 13 −
" Using this
Advertisement
Table of Contents
