Parking Mode; Photography Feature - Pioneer VREC-DZ600 Owner's Manual

Parking Mode

When the power supply to this product is turned off (vehicle engine is turned off, or the cigarette
lighter power cable is removed), the parking mode is activated for a fixed period of time. The maximum
operation time is approximately 90 minutes.
When this device detects vehicle movement caused by vibration while the parking mode is activated, that
event is saved for 30 seconds before and 30 seconds after the moment of detection as a parking mode
file, and a notification message is displayed at the next startup.
Notes
• The parking mode can be set to on or off.
The operation time of the parking mode can also be set.
→
"This Product Settings" - "Configurable Features"
Video Length"
• You can adjust the sensitivity for detecting vibration.
→
"This Product Settings" - "Configurable Features"
Sensitivity"
• Vibration that is detected for approximately three minutes after power supply to this device is
stopped and for approximately three minutes before power supply is started is not covered by the
notification message display feature.
• The recording time may differ depending on the conditions.
Security mode <RD-HWK100 (sold separately)>
If the pre-set operation time elapses when the security mode is turned ON, the security mode in which
parking surveillance is performed 24 hours per day, 365 days per year is automatically activated.
When this device detects vehicle movement caused by vibration while the security mode is activated,
that event is saved for the set normal video time after the moment of detection as a parking mode file,
and a notification message is displayed at the next startup.
Notes
• The security mode can be set to on or off.
→
"This Product Settings" - "Configurable Features" - "Parking Mode" - "Security mode"
• In the security mode, this product runs in the low power consumption mode to reduce the risk of the
battery running flat.
• When the battery voltage drops below 11.2 V, security mode standby and recording are stopped.
• The security mode starts recording within three seconds of detection of impact.
• Vibration that is detected for approximately three minutes before the vehicle's engine is turned on
(ACC ON) is not covered by the notification message display feature.
• The security mode is a feature for starting up and activating this product after an impact is detected.
For this reason, the battery might wear more quickly if this product is used in mechanical multi-story
parking garages or location subjected to lots of vibration. When parking in locations such as these,
set the security mode to off before using this product.
• The recording time may differ depending on the conditions.

Photography Feature

Photos can be taken during video recording or event recording by pressing the
-
"Parking Mode" - "Parking Mode
-
"Parking Mode" - "G-Sensor
− 26 −
function button.