Pioneer VREC-DZ600 Owner's Manual page 7

• Never feed power to other electronic products by cutting the insulation of the power supply cable of
this product and tapping into the cable. The current capacity of the cable will be exceeded, causing
overheating.
To prevent damage
WARNING
• When replacing the fuse, be sure to only use a fuse of the rating prescribed on this product.
Precautions before installation
CAUTION
Never install this product in places where, or in a manner that:
• Could injure the driver or passengers if the vehicle stops suddenly.
• May interfere with the driver's operation of the vehicle, such as on the floor in front of the driver's seat,
or close to the steering wheel or gearstick.
• To ensure proper installation, be sure to use the supplied parts in the manner specified. If any parts
are not supplied with this product, use compatible parts in the manner specified after you have the
parts' compatibility checked by your dealer. If parts other than supplied or compatible ones are used,
they may damage internal parts of this product or they may work loose and the product may become
detached.
• Do not install this product where it may
(i) obstruct the driver's vision,
(ii) impair the performance of any of the vehicle's operating systems or safety features, including
airbags, hazard lamp buttons or
(iii) impair the driver's ability to safely operate the vehicle.
• Never install this product in front of or next to the place in the dashboard, door, or pillar from which
one of your vehicle's airbags would deploy. Please refer to your vehicle's owner's manual for reference
to the deployment area of the frontal airbags.
• Consult with your nearest dealer if installation requires drilling holes or other modifications of the
vehicle.
• Before making a final installation of this product, temporarily connect the wiring to confirm that the
connections are correct and the system works properly.
• Do not install this product in places subject to high temperatures or humidity, such as:
— Places close to a heater, vent or air conditioner.
— Places that may be exposed to rain, such as close to the door or on the vehicle's floor.
Precautions for cigarette lighter plug
WARNING
• When using a power supply in the vehicle, use the dedicated cigarette lighter plug.
Using a plug other than the specified plug may result in fire, electric shock, or product failure.
• Unplug the cigarette plug after using the product and when the product will not be used for a long
period of time. Depending on the vehicle, the cigarette socket may not be turned off even when the
engine is turned off. For this reason, there is a risk of fire or a dead battery.
• Fully insert the cigarette lighter plug. Poor contact may occur due to vibrations while driving, resulting
in an extremely dangerous situation where the unit overheats.
• Regularly inspect and clean the cigarette lighter socket. Foreign material inside the cigarette lighter
socket, such as ashes, may cause heat generation due to poor contact, resulting in fire or electric
shock.
− 7 −