Table of Contents
Advertisement
Video Recording
Recording automatically starts when this product is started. The recorded video is saved to the
microSD card as one file of the set increment of time (default: 3 minutes), and when the microSD card
runs out of free space, the files are overwritten starting from the oldest file.
Notes
• You can change the video recording time.
→
"This Product Settings" - "Configurable Features"
Length"
• Video recording will stop under the following circumstances.
— When the MENU screen is displayed
— When the power supply is stopped
— When parking mode has started
• The recording time may differ depending on the conditions.
Event Recording
Automatic Recording by Detecting Impacts (Event Recording)
The continuous video file when an impact was detected by this product, such as an impact with another
vehicle, is automatically saved for the 30 seconds before and 30 seconds after the moment of detection
as an event video file.
Start of recording
Video recording file 1
* The video recording file is saved to the "Video" folder.
* The event video file is saved to the "Event" folder.
Manual Recording (Manual Event Recording)
The manual recording file when the function button
for the 30 seconds before and 30 seconds after the moment the button is pressed as an event video file.
Notes
• You can adjust the sensitivity for detecting impacts.
→
"This Product Settings" - "Configurable Features"
Sensitivity"
• When impact was detected or manual recording was performed in the event recording mode, event
recording is started again after event recording ends.
• The recording time may differ depending on the conditions.
-
"Video Recording" - "Video Clip
30 seconds before, 30 seconds after
Event video file
Video recording file 2
Impact detected
is pressed during video recording is saved
-
"Video Recording" - "G-Sensor
− 25 −
Video recording file 3
Advertisement
Table of Contents
