Check The Accessories; Before Installing The Product; Installation Precautions - Pioneer ND-DVR100 Owner's Manual

Check the Accessories

This product × 1
Cleaning Cloth × 1

Before Installing the Product

CAUTION
First check with the vehicle manufacturer for precautions related to the installation work when installing the prod-
⨋
uct in a vehicle equipped with airbags. Otherwise there is a risk of airbag malfunction.
Always use the included parts as specified. There is a risk of product failure if other parts are used.
⨋
Install this product in a location where it will not hinder vehicle equipment and the ability to drive the vehicle.
⨋
Installation Tips
Before Installing and Securing the Product
First, temporarily connect this product and confirm that it operates correctly, and then install it. If the product
⨋
does not operate correctly, check again if there is a mistake in the connection.
Before Applying Double-sided Tape
Clean the location where the double-sided tape will be applied.
⨋
The double-sided tape cannot be reapplied once applied and peeled off because its adhesive power will weaken.
Temporarily attach this product and carefully review the routing of the cable before applying the double-sided tape.

Installation Precautions

This product is for installation to the front windshield only. Do not install it anywhere else inside or outside of the
⨋
vehicle.
Always install this product to the specified position of the front windshield and within the specified dimensions.
⨋
Depending on the vehicle, it may not be possible to install this product to the specified position and within the
⨋
specified dimensions. Consult with your dealer or the nearest authorized Pioneer Service Station for details.
Do not cover this product or get the lens dirty.
⨋
Do not place reflective objects near the lens.
⨋
Take care when handling this product so that it does not drop and you do not touch the lens.
⨋
Recording quality may be affected if the front windshield of the vehicle is coated or has been specially treated.
⨋
This product may not be able to receive GPS signals if the front windshield of the vehicle has been specially
⨋
treated.
Check the GPS reception status indicator displayed on the screen of this product. If a GPS signal cannot be
⨋
received, this product cannot be installed in this vehicle.
Choose a working location free from dust and debris in the air.
⨋
When the temperature is low or there is condensation on the glass, turn on the heater and defroster to warm up
⨋
the window in order to prevent poor adhesion of the double-sided tape.
Installation Bracket (attached to
this product) × 1
Owner's Manual
→
Power Cable (3.5 m / 11 ft. 6 in.) × 1
microSDHC Card (8 GB) × 1
SD Conversion Adapter × 1
"Using this product" - "Status Display"
Cigarette Lighter