Before Installing The Product; Installation Tips; Installation Precaution - Pioneer VREC-100CH User Manual

Preparation for initial usage

Before Installing the Product

CAUTION
• First check with the vehicle manufacturer for precautions related to the installation
work when installing the prod
uct in a vehicle equipped with airbags. Otherwise there is a risk of airbag malfunction
• Always use the included parts as specified. There is a risk of product failure if other
parts are used
• Install this product in a location where it will not hinder vehicle equipment and the
ability to drive the vehicle

Installation Tips

Before Installing and securing the product
• First, temporarily connect this product and confirm that it operates correctly, and then
install it. If the product
does not operate correctly, check again if there is a mistake in the connection
Before Applying Double-sided Tape
• Clean the location where the double-sided tape will be applied
The double-sided tape cannot be reapplied once applied and peeled off because its
adhesive power will weaken. Temporarily attach this product and carefully review the
routing of the cable before applying the double-sided tape

Installation Precaution

• This product is for installation to the front windshield only Do not install it anywhere
else inside or outside of the
• Always install this product to the specified position of the front windshield and within
the specified dimensions
• Depending on the vehicle, it may not be possible to install this product to the specified
position and within the specified dimensions. Consult with your dealer or the nearest
authorized Pioneer Service Station for details
11 / 22