Table of Contents
Advertisement
Before Installing the Product
WARNING
• When installing the product on vehicles installed with an air bag, never install on the cover of the air
bag and at locations that might obstruct the deployment of the air bag. Doing so might prevent the air
bag from being deployed normally, cause the product to fly out due to air bag deployment, and cause
accident and injury.
CAUTION
• First check with the vehicle manufacturer for precautions related to the installation work when installing
the product in a vehicle equipped with airbags. Otherwise there is a risk of airbag malfunction.
• Always use the included parts as specified. There is a risk of product failure if other parts are used.
• Install this product in a location where it will not hinder vehicle equipment and the ability to drive the
vehicle.
Installation Precautions
• The main unit is for installation to the inside of the front window only. Do not install it anywhere else
inside or outside of the vehicle.
• When installing the main unit to the inside of the front windscreen, be sure to install it to the specified
positions of the front windscreen and within the specified dimensions.
• Make sure that the surface of the front windscreen is clean and dry, before attaching the mounting
cradle.
• Depending on the vehicle, installation at the specified location and within the specified dimensions
may not be possible. For details, consult with your dealer.
• Do not cover the main unit or get the lens dirty.
• Do not place reflective objects near the lens.
• Take care when handling the main unit that it does not drop and you do not touch the lens.
• Recording quality may be affected if the front windscreen of the vehicle is coated or has been specially
treated.
• Choose a working location free from dust and debris in the air.
• When the temperature is low or there is condensation on the glass, turn on the heater and defroster to
warm up the window in order to prevent poor adhesion of the mounting cradle.
• To avoid the windscreen mounted cradle from detaching, you may attach the safety strap (included
in the box).
• Always install this product in the specified installation position to ensure a safe field of view while
driving and to achieve full performance from the product.
• Pioneer is not liable for any damage, due to installation or use of the product.
Installation Tips
Before Installing and Securing the Product
• First, temporarily connect this product and confirm that it operates correctly, and then install it. If the
product does not operate correctly, check again if there is a mistake in the connection.
Before Applying Mounting Cradle
• Clean the location where the mounting cradle will be applied.
CAUTION
• Install firmly so that it does not come off. Incorrect installation may cause this to detach whilst driving
and cause an accident. Inspect the installation state from time to time.
− 11 −
Advertisement
Table of Contents
