Important Voltage Information - Energetics POWER RUN 14.0 HRC Owner's Manual

Safety Instructions
To protect the floor or carpet from damage, place a mat under the treadmill.
-
Turn off the power whilst the treadmill is not in use and remove the safety key.
-
In case of emergency please place both feet at the same time on the side reins.
-
To activate an emergency stop, please detach the safety key from the console.
-
Ensure that an area of 2000 x 1000 mm behind the treadmill is free from any obstacles.
-
This product is made for home use only and tested up to a maximum body weight of 150 kilograms.
-
We take no responsibility for personal injury or damage sustained by or through the use of this treadmill.
-

Important Voltage Information

Before plugging the power cord into an electrical outlet, verify that the voltage requirements for your area match.
The voltage of the treadmill that you have received. The power requirements for the treadmill include a
grounded, dedicated circuit, rated for one of the following figure. See the serial number decal for the exact
voltage requirements of your treadmill.
WARNING: Don't attempt to use this unit with a voltage adapter.
Don't attempt to use this unit with an extension cord. Grounding Instructions:
This treadmill must be grounded. If it should malfunction or break down, grounding provides a path of least
resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord having an
equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that
is properly installed and grounded in accordance with all local codes and ordinances. Make sure that the
treadmill is connected to an outlet having the same configuration as the plug. Do not use ground plug adapter to
adapt the power cord to a non-grounded outlet.
115V Euro Plug 208-220V
NEMA 5-20 CEE 7/7 NEMA 6-15
The power requirements for the treadmill
include a grounded, dedicated circuit,
rated for one of the following:
115 VAC±5%, 60HZ and 20 Amps
208/220 VAC, 60HZ and 15 Amps
230VAC±5%, 50HZ and 15 Amps
4