Solid-State Drive - HP OMEN 15-en0000 Maintenance And Service Manual

1. Remove the eight Phillips M2.0 × 6.0 screws that secure the bottom cover to the computer..
2. Use a tool (1) to release the bottom cover near the display (2), and then remove the bottom cover from
the computer (3).
To replace the bottom cover, reverse the removal procedures.

Solid-state drive

To remove the solid-state drive, use this procedure and illustration.
Table 5-2 Solid-state drive descriptions and part numbers
Description
1 TB, PCIe, TLC
512 GB, PCIe, TLC
32 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
Spare part number
L85348-001
L85360-001