Power Connector Cable - HP OMEN 15-en0000 Maintenance And Service Manual

1. Prepare the computer for disassembly
2. Remove the bottom cover
3. Remove the solid-state drive to the left of the battery
WARNING!
computer, a replacement battery provided by HP, or a compatible battery purchased from HP.
IMPORTANT:
loss of information. To prevent loss of information, save your work or shut down the computer through
Windows before you remove the battery.
Remove the battery:
1. Doisconnect the battery cable from the system board (1).
2. Remove the five Phillips M2.0 × 5.0 screw (2) that secure the battery to the computer.
3. Remove the battery from the computer (3).
To insert the battery, reverse the removal procedures.

Power connector cable

To remove the power connector cable, use this procedure and illustration.
Table 6-2 Power connector cable description and part number
Description
Power connector cable
Before removing the power connector cable, follow these steps:
38 Chapter 6 Removal and replacement procedures for authorized service provider parts
(Bottom cover on page
To reduce potential safety issues, use only the user-replaceable battery provided with the
Removing a user-replaceable battery that is the sole power source for the computer can cause
(Preparation for disassembly on page
31).
(Solid-state drive on page
31).
32).
Spare part number
L98734-001