Reserve Lan Ip Addresses; Ipv6 Lan Settings - TP-Link Archer VR400 User Manual

Chapter 15

15. 1. 3. Reserve LAN IP Addresses

You can view and add a reserved address for a client. When you specify an IP address
for a device on the LAN, that device will always receive the same IP address each time
when it accesses the DHCP server. If there are some devices in the LAN that require
permanent IP addresses, please configure Address Reservation on the router for the
purpose.
Follow the steps below to reserve an IP address for your device.
1. Visit http://tplinkmodem.net, and log in with your TP-Link ID and the password you
set for the router.
2. Go to Advanced
3. Scroll down to locate the
reservation entry for your device.
4. Click Scan and select the device for which you want to reserve IP address. Or enter
the MAC Address
5. Specify the IP Address
6. Check to Enable this entry

15. 2. IPv6 LAN Settings

Based on the IPv6 protocol, the modem router provides two ways to assign IPv6 LAN
addresses:
• Configure the RADVD (Router Advertisement Daemon) address type
• Configure the DHCPv6 Server address type
> Network > LAN Settings
Address Reservation
manually.
which will be reserved by the router.
and click Save
Specify Your Network Settings
page and select IPv4.
table and click Add
to make the settings effective.
to add an address
75