Set Up An Ipv6 Connection - TP-Link Archer VR400 User Manual

Chapter 4
3. Click Start to test the internet connectivity and you will see the test result in the
gray box.
4. 4.

Set Up an IPv6 Connection

If your ISP has provided a DSL line that supports IPv6 connection as well as some
detailed IPv6 parameters, you can manually set up an IPv6 connection.
If your ISP provides an IPv4-only connection or IPv6 tunnel service, permit IPv6
connection by referring to
Follow the steps below to set up an IPv6 connection:
1. Make sure you have set up an IPv4 connection either manually or by using the Quick
Setup wizard before setting up an IPv6 connection.
2. Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password your
set for the router.
3. Go to Advanced
4. Select your WAN Interface Name
(Edit) icon.
Set Up the IPv6
> Network > Internet
(Status
Set Up Internet Connections
Tunnel.
page.
should be Connected) and click the
16