Snmp Settings - TP-Link Archer VR400 User Manual

Chapter 16
• Get RPC methods:
Click Save to make the settings effective.

16. 11. SNMP Settings

SNMP (Simple Network Management Protocol) is widely applied in the computer
networks of today, and is used for ensuring the transmission of the management
information between two nodes. In this way, network administrators can easily search
and modify the information on any node on the network. Meanwhile, they can locate
faults promptly and implement the fault diagnosis, capacity planning and report
generating.
An SNMP Agent is an application running on the modem router that performs the
operational role of receiving and processing SNMP messages, sending responses to
the SNMP manager, and sending traps when an event occurs. So a router contains
SNMP "agent" software can be monitored and/or controlled by SNMP Manager using
SNMP messages.
1. Visit http://tplinkmodem.net, and log in with your TP-Link and the password you set
for the router.
2. Go to Advanced
• SNMP Agent: Toggle On to enable the built-in SNMP agent that allows the router
to operate as the operational role in receiving and processing of SNMP messages,
sending responses to the SNMP manager, and triggering SNMP traps when an event
occurs.
Click to get the methods to support CWMP.
> System Tools > SNMP Settings
Administrate Your Network
page.
102