TP-Link Archer VR400 User Manual page 61

Chapter 13
Personal Website
How can I do that?
1. Assign a static IP address to your PC, for example 192.168.1.100.
2. Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you
set for the router.
3. Go to Advanced
4. Click Scan, and choose HTTP. The external port, internal port and protocol will be
automatically filled with contents. Enter the PC's IP address 192.168.1.100 in the
Internal IP field.
5. Click Save to save the settings.
Tips:
1. It is recommended to keep the default settings of
protocol to use.
2. If the service you want to use is not in the
should verify the port number that the service needs.
3. You can add multiple virtual server rules if you want to provide several services from a modem router. Please note that
the External Port cannot be overlapped.
Modem Router
WPS�Reset USB LAN1 LAN2 LAN3 LAN4�WAN
LAN WAN: 218.18.232.154
Home
> NAT Forwarding >
Internal Port
Service Type, you can enter the corresponding parameters manually. You
Virtual Servers, click Add.
and Protocol if you are not clear about which port and
NAT Forwarding
57