Use Quick Setup Wizard; Manually Set Up An Internet Connection - TP-Link Archer VR400 User Manual

Chapter 4
4. 1.

Use Quick Setup Wizard

1. Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password your
set for the router.
2. Click Quick Setup
to connect your router to the internet.
3. To enjoy a more complete service from TP-Link (remote management, TP-Link
DDNS, etc.), log in with your TP-Link ID or click
the instructions to bind the modem router to your TP-Link ID.
Note:
1. To learn more about the TP-Link Cloud service, please refer to the
2. If you do not want to register a TP-Link ID for now, you may click
3. If you have changed the preset wireless network name (SSID) and wireless password during the Quick Setup process,
all your wireless devices must use the new SSID and password to connect to the router.
4. 2.

Manually Set Up an Internet Connection

1. Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password your
set for the router.
2. Go to Basic >
automatically filled in. For some ISPs, you may need to manually specify some
information provided. If you can't find your ISP in the
enter the information provided by your ISP.
on the top of the page. Then follow the step-by-step instructions
Internet page. Select your ISP, and related information will be
Set Up Internet Connections
Register Now to get one. Then follow
TP-Link Cloud section.
Log In Later to proceed.
ISP List, select Other and then
14