Snmp Settings - TP-Link Archer MR200 User Manual

Chapter 12
• Connection Request Port:
• Connection Request URL:
• Get RPC methods: Click to get the methods to support CWMP.
Click Save to make the settings effective.

12. 10. SNMP Settings

SNMP (Simple Network Management Protocol) has been widely applied in the computer
networks currently, which is used for ensuring the transmission of the management
information between two nodes. In this way, network administrators can easily search
and modify the information on any node on the network. Meanwhile, they can locate
faults promptly and implement the fault diagnosis, capacity planning and report
generating.
An SNMP Agent is an application running on the router that performs the operational
role of receiving and processing SNMP messages, sending responses to the SNMP
manager, and sending traps when an event occurs. So a router contains SNMP "agent"
software can be monitored and/or controlled by SNMP Manager using SNMP messages.
1. Visit http://tplinkmodem.net, and log in with the password you set for the router.
2. Go to Advanced
• Enable SNMP Agent:
the router to operate as the operational role in receiving and processing of SNMP
messages, sending responses to the SNMP manager, and triggering SNMP traps
when an event occurs.
Enter the port that connects to the ACS server.
Enter the URL that connects to the ACS server.
> System Tools > SNMP Settings
Toggle On to enable the built-in SNMP agent that allows
Administrate Your Network
page.
76