10. Controlling the Fan
Your fan was delivered to you with the included control already paired to
your fan.
A: Light On/Off, Bright/Dim
B: Fan On/Off, Speed Up/Down
C: Season (Summer/Winter)
Air-Gap Switch: Pull tab to power off in case of emergency. Not
necessary for normal fan operation (only included with wall control).
NOTE: Your fan features 6 speeds. An audible tone will indicate when
the speed is increased or decreased. When the fan has reached the
minimum/maximum speed level the fan will beep twice.
Controlling One or Multiple Fans with Remote or Wall Controls
Your wall control is capable of controllingmultiple fans. A remote or
wall control has the ability to control an unlimited number of fans with
the only limitation being the Bluetooth® range of the control and fan.
Pairing a remote control or wall control to an additional fan(s) can
be performed in the same manner as described in the pairing section.
NOTE: Pairing must be completed within three (3) minutes of
powering the fan.
Synchronizing Control Across Multiple Fans
If you are controlling more than one fan with a remote control, there
is a possibility that their light state, fan state or fan direction can get
out of sync. To bring the fans/lights back into sync please follow the
instructions on the next page.
F H - W 1 8 1 1 - 5
22
Aviator Flush Instructions
Need help?
Do you have a question about the Aviator 5 Flush and is the answer not in the manual?