Modern Forms Aviator 5 Flush Installation Instructions Manual page 8

Package Contents
1. Blade Set of 5
RPL-F-1811-**-BD-**
2. Blade Collector Ring
3. Hanger Plate
RPL-F1811-HANGER-**
4. Hanger Gasket
** denotes finish code of fan
Hardware Bag
RPL-F1811-5-FHPART
• 3/16" x .375" Flat head
screws (5)
• 4x9mm Flat head screws (11)
• 5.2x8.4x1mm
Spring washers (1)
• 6.5x19x2mm Flat washer (1)
• #10x76mm Pan head
Philips wood screw (1)
Before discarding packaging materials be certain all parts have been removed.
Place the parts from the hardware bag into a small container to keep them from being lost.
8 Aviator Flush Instructions
5. Motor Assembly
6. Bottom Cap (Aluminum)
PL-F1811-5-CA-**
7. Control Receiver w/Hardware
F-R3-1811-***
8. Wall Control w/Hardware
F-WCBT-WT
*** denotes blade sweep of fan
• #10x38mm Pan Head
Phillip Screws (2)
• Ø5*14*1mm Flat Washer (2)
• 3/16" Star Washer (2)
• 1/4"x11mm+Phil/Slotted
Screws (6)
• 1/4"x1/2"mm+Phil/Pan
Head Screws (21)
F H - W 1 8 1 1 - 5