Finishing The Installation - Modern Forms Aviator 5 Flush Installation Instructions Manual

7. Finishing the Installation

1. Secure all wire connections with supplied wire ties to assist in
fan installation.
2. Tuck connections neatly into ceiling outlet box.
3. Remove the motor assembly from the hook on the mounting bracket.
Position the motor up to the hanger plate and attach
using two screws through the two key slots in the top of the
motor housing (Fig. 7).
NOTE:
Make sure the receiver sits flat and does
not interfere with the hook.
4. Align the remaining two circular holes on motor housing with the
two holes on the hanger plate. Secure by tightening the two screws.
16 Aviator Flush Instructions
F H - W 1 8 1 1 - 5