DAVIS Vantage Pro2 Console Manual page 24

Davis vantage pro2 weather-accessories: user guide
Hide thumbs Also See for Vantage Pro2:
Table of Contents

Advertisement

Selecting Units of Measure
Wind Chill
Press 2ND then press CHILL to select Wind Chill. Wind
Chill is displayed in either Fahrenheit (ºF) or Celsius (ºC) in
whole degrees.
The console uses the ten-minute average wind speed to calculate wind chill.
Dew Point
Press 2ND then press DEW to select Dew Point. Dew Point
is displayed in either Fahrenheit (ºF) or Celsius (ºC) in whole
degrees.
Barometric Pressure
Press BAR to select barometric pressure. Barometric pressure may be
displayed in inches (in), millimeters (mm), millibars (mb) or hectoPascals
(hPa).
Pressure Trend
The pressure trend arrow indicates the current barometric trend, mea-
sured over the last three hours. The pressure trend is updated every 15
minutes. The pressure trend requires three hours of data in order to be
calculated so it won't display right away on a new station. The pressure trend
is indicated on the console screen, as long as the required data is available.
WIND
N
NW
W
MPH
SW
S
Last 24 hrs
Vertical Scale:
UV (Ultraviolet Radiation)
Press 2ND and UV to display the current UV index. The cur-
rent UV index is the amount of ultraviolet radiation the sensor
is currently reading.
Press 2ND and UV again to display the accumulated UV index for the day.
The accumulated UV index is the total ultraviolet radiation that the sensor has
read throughout the day. The accumulated UV index for the day is reset to zero
every night.
Note:
Requires a UV sensor. (See "Optional Sensors" on page 2)
21
pm
NE
TEMP OUT
HUM OUT
BAROMETER
F
E
TEMP IN
UV
SE
F
index
Every 1
hr
THSW
INDEX
RAIN
YEAR
DAILY RAIN
in
STATION NO.1
X10
UV
index
THSW
INDEX
UV, Heat, and THSW Index
2
ND
2
ND
hPa
F
F
in
HEAT INDEX
F
2
ND
CHILL
WIND
DEW
HUM
BAR
UV
RAIN
YR

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vantage pro2 plus

Table of Contents