DAVIS Vantage Pro2 Console Manual page 23

3. Press WIND a second time to display the wind direction in degrees instead
of the wind speed.
Note: When displayed in degrees, Due North displays as 360
2005 or later. Previous releases marked Due North at 0
Each additional WIND key press toggles the display between wind speed
and wind direction in degrees.
Outside and Inside Temperature
1. Press TEMP to select outside temperature.
Temperature may be displayed in degrees Fahrenheit (ºF) or
Celsius (ºC).Temperatures can also be displayed in degrees or
in tenths of a degree.
2. Press TEMP again to select inside temperature.
Each consecutive press of TEMP displays temperature readings for any
optional temperature, temperature/humidity, soil temperature, soil moisture
stations also connected to your console. The order the optional sensors
readings display depends on your station configuration. Temperatures for
temperature stations display, with soil temperature and moisture stations
displaying consecutively.
HUM IN
WIND N
NW
W
MPH
SW
S
Last 24 hrs
Vertical Scale:
Humidity
Press HUM to select outside humidity. Pressing HUM a second time
selects inside humidity. Humidity is displayed in percent relative humidity.
Each consecutive press of HUM displays humidity readings for any optional
humidity, leaf wetness, and leaf temperature stations also connected to your
console. The order the optional sensors readings display depends on your sta-
tion configuration. Humidity readings for humidity stations display, with leaf
wetness and leaf temperature readings displaying consecutively.
HUM OUT
pm
NE
TEMP OUT HUM OUT
BAROMETER
F
E
hPa
TEMP IN HUM IN
SE
F F
HEAT INDEX
Every 1 hr
DAILY RAIN RAIN YEAR
in
in
STATION NO.1
X10
Humidity, Pressure, Dew Point & Wind Chill
Selecting Units of Measure
º for consoles with firmware dated May
º
.
BAROMETER
hPa
DEW POINT
F
CHILL
F
TEMP
DEW
HUM
20