Setting The Time Alarm; Clearing Alarm Settings; Silencing Alarms - DAVIS Vantage Pro Console Manual

3. Using Your Weather Station

Setting the Time Alarm

1. Press 2ND then press the ALARM key to enter the alarm mode.
The ALARM and HIGHS icons appear.
2. Press Time, then press 2ND, and then press SET.
The time field will begin blinking.
3. Press < and > to select hours, minutes, or am/pm.
4. Press the + and - keys to change the digit's value up and down.
5. When you are finished, press DONE to exit Alarm Mode.

Clearing Alarm Settings

1. Press 2ND then press the ALARM key to enter the alarm mode.
The ALARM and HIGHS icons will appear.
2. Select the alarm setting you wish to clear.
3. Press 2ND, then press and hold CLEAR until the setting changes to all
dashes.
You have cleared the alarm setting.
4. When you are finished, press DONE to exit Alarm Mode.

Silencing Alarms

1. Press DONE to silence an alarm.
Barometric Pressure Trend
Evapotranspiration
Humidity, Inside
Humidity, Outside
Dew Point
Leaf Wetness
Rain
Storm
Rain Rate
Soil Moisture
Solar Radiation
Inside Temperature
T 3-3: V
ABLE ANTAGE
Variable
P S
RO TATION
Storm Warning - uses trend value rising rate
Storm Clearing - uses trend value falling rate
ET Alarm - uses total ET for the day
High and Low
High and Low
High and Low
High and Low
Flash Flood Alarm - uses current 15 minute rainfall total
24 Hour Rain Alarm - uses current 24 hour rainfall total
Storm Alarm - uses current storm rainfall total
High
High and Low
High
High and Low
A
LARMS
Alarms