DAVIS Vantage Pro Console Manual page 26

3. Using Your Weather Station
Humidity
Press the HUM key to select outside humidity. Pressing the
HUM key a second time selects inside humidity. Humidity is
displayed in percent relative humidity.
Wind Chill
Press the 2ND key then press the CHILL key to select
Wind Chill. Wind Chill is displayed in either degrees
Fahrenheit (ºF) or Centigrade (ºC).
Note:
The console uses the ten-minute average wind speed to calculate wind chill.
Dew Point
Press the 2ND key then press the DEW PT key to
select Dew Point. Dew Point is displayed in either
degrees Fahrenheit (ºF) or Centigrade (ºC).
Barometric Pressure
Press the BAR key to select barometric pressure. Baromet-
ric pressure may be displayed in inches (in), millimeters
(mm), millibars (mb) or hectoPascals (hPa).
Pressure Trend
The pressure trend arrow indicates the current barometric trend,
measured over the last 3 hours. The pressure trend requires three
hours of data in order to be calculated so you won't see it right away
on a new station. The pressure trend is always indicated on the console
screen, as long as required data is available.
HUM IN
WIND N
NW NE
TEMP OUT
F
W E
MPH
TEMP IN
SW SE
F
S
Last 24 hrs Every 1 hr
DAILY RAIN
in
STATION NO.1
Vertical Scale: X10
Humidity, Pressure, Dew Point, & Wind
Chill
HUM OUT
pm
HUM OUT BAROMETER
hPa
HUM IN
F
HEAT INDEX
RAIN YEAR
in
BAROMETER
hPa
DEW POINT
F
CHILL
F
DEW PT
2 ND
2 ND
HUM
CHILL
WIND
DEW PT
HUM
ET
BAR