Table & Shelf Placement - DAVIS Vantage Pro Console Manual

Table & Shelf Placement
The console kickstand can be set to
five different angles providing five dif-
ferent display angles.
1. Lean the kickstand out by pulling on
its top edge.
You'll see the indentation for your
finger at the top edge of the console.
2. Slide the catch to arrest the kick-
stand in the appropriate angle.
Choose low angles for display on a
coffee table or other low area.
Choose higher angles for display on
a desk or shelf.
3. Pull up on the stand to close it. It will
be a little tight, so it's okay to push hard enough to get it to slide.
4. Install the two round
rubber feet on the
bottom of the con-
sole.
5. Install the two rubber
channel feet on the kick-
stand.
Console Location