Alarm Mode.; Setting Alarms; Setting The Time Alarm; Clearing Alarms - DAVIS Vantage Pro Console Manual

Setting Alarms

1. Press the 2ND and the ALARM button to enter the alarm mode.
The ALARM and HIGHS icons will appear. If you want to set LOW alarms,
press 2ND and ALARM. Then press the HI/LOW button. The LOWS icon
will appear. See "Graph and Hi / Low mode settings" on page 2.
2. Select any weather variable available.
Use the arrow keys to select variables currently displayed, or use the key-
press sequences.
3. Press 2ND and SET.
The rightmost digit in the variable field will begin blinking. Use the up and
down arrow keys to change the digit. Use the left and right arrow keys to
move between digits.
4. When you've keyed in the threshold value you want, press the DONE key.
You're still in the alarm mode, so choose any other variable for which you'd
like to set a threshold.
5. If you're finished setting alarms, press DONE again and the console will return to cur-
rent weather mode.

Setting the Time Alarm

1. To set the time alarm, enter the alarm mode as described above.
2. Press Time, then 2ND and SET.
The time field will begin blinking. Use the LEFT and RIGHT buttons to
select hours, minutes, or am/pm. Use "+" and "-" to change digits.

Clearing Alarms

Clearing an alarm is easy.
• If an alarm is sounding, press the DONE key to stop it.
• To clear an alarm setting
1. Enter alarm mode as described above.
2. Select the variable alarm you wish to clear, either by pressing the key, e.g. UV,
or using the arrow keys.
You must use the keypress sequence to activate the variable if the vari-
able is not displayed.
• Press 2ND, then press and hold CLEAR.
The threshold value will blink. When the value changes to all dashes,
you have cleared the value.

Silencing Alarms

Press DONE to silence an alarm.
Vantage Pro Console Manual
Alarms Mode
Page 39