Table of Contents
Advertisement
Service
6. Grease piston packings.
7. Grease top inch or two of piston rod that will go
through the cylinder throat packings.
Do not slide piston assembly into top of cylinder as this
may damage piston packing.
8. Slide piston rod assembly into bottom of cylinder.
Replace o-ring (207) if desired.
8
NOTICE
ti31058a
9. Reassemble intake valve with new o-ring (227),
seat (212) and ball (214). Seat may be flipped over
and used on other side. Clean seat thoroughly.
ti31057a
ti23115c
10. Install intake valve on cylinder. If a wrench is used
torque to 60 ± 5 ft-lb (81 ± 7 N•m).
ti31059a
215
214
212
227
213
3A5053B
Hide quick links:
Advertisement
Table of Contents
