Advertisement
Programming Troubleshooting
The Yale logo displays
intermittent RED flashes.
* When batteries are replaced, Smart Module locks have a real time clock that will be set through the User Interface (UI); it
is recommended to verify correct date and time particularly those locks operating under Daylight Saving Time (DST).
Symptom
Check that the cable is firmly connected to the interior lock.
Verify entered code is a valid, previously programmed,
4 to 8 digit code.
All Code Lockout Mode is enabled. Only the Master Entry
Code can enable/disable All Code Lockout Mode.
Contact the Master user.
P/N YRL-LPBINSTL-FUL Rev D
Suggested Action
27
Advertisement
