Effects: Quad; Effects: Split; Effects: Picture In Picture; Freeze - Datavideo SE-500 Instruction Manual

Effects: Quad

The Quad effect combines 4 input videos into 1 output. When this effect is activated, it shows 4 video
sources on 1 single monitor. Each source takes one quarter of the entire screen. Press the button again, and
it returns to the previous selected source in full screen.
This is a dual channel effect, and cannot be used with any other transitions or effects.

Effects: Split

This effect will squeeze the Main Video Source and Sub Video Source into a half size screen. The default
setting is Main Video Source on the left, and the Sub Video Source on the right. Select different sources for
the left window by pressing different channels on the Main Video Source. You could switch from left to right,
or right to left by pressing the "LEFT" or "RIGHT" button. You could also select different sources for the left
window by pressing 1-4 channel on Main source or pressing 1-4 channel on Sub source for right window.

Effects: Picture in Picture

The Picture in Picture effect puts the selected Sub Video Source in a window on the Main Video Source.
Variables for this effect include window size and position. Engage the effect by pressing the Picture in
Picture button and verifying that the LED on the button is lit.
Window size (2 sizes are available); change the window size by pressing the ＋ and － buttons on the left of
the Wipe transitions. (＋ is larger, － is smaller).
There are 9 different positions that are located on the right of the Wipe transition effects. Select from one of
the preset locations by using the buttons. On each corner, use "Right" and "Left" to move the window closer
to the edge or to the center.
This effect may also be used in conjunction with the Border keys (see below).
This is a dual channel effect, and cannot be used with any other transitions or effects.
Effects: Freeze
This effect freezes the incoming video, as selected on the Main Video Source Bus. There are no parameters,
no variations. Press the button once and the video freezes, press it again, and it returns to the selected
source in full motion.
The Freeze effect is single channel, and can work in conjunction with any transition.
27