Transition Effects; Cutting Between Sources; Mixing Between Sources - Datavideo SE-1200MU Instruction Manual

6.3

Transition Effects

The SE-1200 MU allows the user options for cutting or transitioning between the selected preset and
program video sources.

6.3.1 CUTTING between Sources

Cutting between sources is a clean switch from the current Program video to the next source image. This
can be achieved in two ways:
1. Each button press on the Program row will cause an instant clean cut to the selected source.
(Active selection is backlit red)
2. Selecting the next source on the lower Preset row of buttons and then pressing the Cut button.

6.3.2 Mixing between Sources

To change the rate of transition for the Auto button, press
the Home menu button and change the M/E Trans
duration value in frames.
If this M/E Trans value is small then the transition will
happen quickly. If this value is larger, then the transition
will take longer to complete.
In order to mix between two video sources, first ensure the Background Transition
or Bgnd button is ON / backlit green in the transition controls area of the user
interface.
Pressing Mix will select a mix transition to use when moving from the current
video source on the Program row to the selected next source on the Preset row.
26