Transition Effects; Cutting Between Sources; Mixing Between Sources - Datavideo SE-700 Quick Start Manual

Transition effects

The SE-700 allows the user several options for cutting or transitioning between the selected preview and program
video sources.

CUTTING between sources

Cutting between sources is an instant switch from the current Program video to the selected Preview source image.
This can be achieved in two ways:
1. Each button press on the Program row will cause an instant clean cut to the selected source.
2. Selecting the next source on the Preset row of buttons and then pressing the CUT button.

Mixing between sources

In order to mix between two video sources first ensure the Transition Background or TRANS BG button is ON.
TRANS BG
Pressing MIX will select a mix transition to use when moving from the current video source on the Program row to
the selected next source on the Preset row.
Mix transition effect
The timing of this MIX transition can be manually decided when moving the T-Bar or completed over a set time
when using the AUTO button.
To change the rate of transition for the AUTO button follow the menu path START> Transition and change the M/E
duration value in frames. If this value is small then the transition will happen quickly. If this value is larger then the
transition will take longer to complete.
Enables Background Transition between Program / Preset
22