Specifications - Datavideo SE-500 Instruction Manual

Specifications

Video Formats
Analog Y/C, Composite CCIR601 NTSC and PAL (PAL and NTSC are separate models)
Video Inputs
4 – S (Y/C), Composite
Video Output
1 – Quad Video source monitoring (Composite)
2 – Composite
1 – S (Y/C)
1 – Component (With breakout cable, it uses the S (Y/C), and one Composite output.)
Audio Inputs
1 – Stereo input (RCA connector)
2 – Mono Microphone (1/4" phono jack)
Audio Output
1 – Stereo main outputs (RCA connector)
1 – Stereo headphone (Mini jack with volume control) 0.3Wrms 8 ohm
Quad Channel Time Base Correction
Full Frame Synchronization, 4:2:2, 13.5MHz
Digital Effects including
A/B dissolves, PIP, border lines, and over 12 Wipes with various manually transition speeds
RS-232 Data Control Port
Connecting PC RS-232 for remote control
Color Processing
Brightness +/-10%
Y-gain +/- 3dB
Color +3/-10dB
Tint +/- 10 degrees (NTSC only)
Video Bandwidth
Component 5.2 MHz
S (Y/C) 5.0 MHz
Composite5.0 MHz
DG, DP +/- 3%, 3 degrees
Signal/Noise Ratio:
Video > 50 dB
Audio > 65 dB
40