Table of Contents
Advertisement
Installation
Aligning the installation niche
The installation niche must be carefully
aligned using a bubble level before in-
stalling the wine conditioning unit. The
niche corners must be at 90° angles to
each other, otherwise the cabinet front
will not sit straight on all 4 corners of
the installation niche.
26
Checking the installation niche
Check the installation dimensions
(see "Installation – Installation dimen-
sions").
Check the position of the electrical
connection. The length of the power
cord is 9' 10" (3 m).
The electrical socket must not be
concealed behind the appliance and
must be easily accessible in an
emergency.
Check the surroundings for possible
collisions (see "Installation – Dimen-
sions with appliance door open").
Only install the wine conditioning unit
in stable, solid installation niches, po-
sitioned on an even and level floor.
Also check the installation niche for
the following criteria:
– The side panels of the installation
niche must be even.
– The surrounding walls of the installa-
tion niche must be at least
5/8" (16 mm) thick.
– The surrounding walls must be se-
curely fixed to the floor or wall.
– Shortened side walls must be at least
4" (100 mm) deep.
Advertisement
Table of Contents
