Table of Contents
Advertisement
IMPORTANT SAFETY INSTRUCTIONS
Technical safety
The refrigerant circuit has been checked for leaks. The wine con-
ditioning unit complies with statutory safety requirements.
To avoid the risk of damage to the wine conditioning unit, make
sure that the connection data (fuse rating, frequency and voltage) on
the data plate corresponds to the household supply.
Check that this is the case before connecting the wine conditioning
unit. Consult a qualified electrician if in any doubt.
The electrical safety of the wine conditioning unit can only be
guaranteed when correctly grounded. It is essential that this stan-
dard safety requirement is met. If in any doubt please have the elec-
trical installation tested by a qualified electrician.
Reliable and safe operation of the wine conditioning unit can only
be guaranteed if it is connected to the power supply.
The electrical outlet must not be concealed behind the wine con-
ditioning unit and must be easily accessible so that the appliance
can be quickly disconnected from the electrical supply in case of an
emergency.
If the power cord supplied is damaged, it must only be replaced
by an original part to prevent a hazard for the user. Miele can only
guarantee the safety of the appliance when original Miele parts are
used.
The electrical outlet must be properly grounded.
Do not connect the appliance to the electrical supply with a power
bar or extension cord. These are a fire hazard and do not guarantee
the required safety of the appliance.
If moisture gets into electrical components or into the power cord,
it could cause a short circuit. Therefore, do not operate the wine
conditioning in areas where there may be moisture or splashing wa-
ter (e.g., garages, laundry rooms).
8
Advertisement
Table of Contents
