Table of Contents
Advertisement
Danger of injury and damage to
the appliance due to the wine condi-
tioning unit tipping over.
If the anti-tip brackets are fixed too
high up, they cannot be used to se-
cure the wine conditioning unit.
The distance between the anti-tip
brackets and the wine conditioning
unit must not exceed 5/16" (8 mm).
Make sure that the gap between the
wine conditioning unit's rear wall and
the installation niche does not exceed
2" (51 mm).
Place a wooden wedge behind the
anti-tip brackets if necessary.
While holding the anti-tip brackets in
place, mark the necessary drill holes
on the rear wall of the installation
niche.
Retaining screws for different uses
and types of material are supplied in
the accompanying pack.
Securing to a concrete wall
Securing to a wooden wall
Installation
29
Advertisement
Table of Contents
