Table of Contents
Advertisement
Installation
Ventilation
The wine conditioning unit can be
placed directly against a wall. Please
note that to ensure sufficient ventilation,
the ventilation gaps must not be
covered or blocked in any way.
They should be dusted on a regular
basis.
Fitting wall spacers supplied
The wall spacers supplied must be
used in order to achieve declared
energy consumption values and to
prevent the build-up of condensation
at high ambient temperatures.
Appliance depth is increased by
approx. 35 mm with the wall spacers
fitted. If the wall spacers are not used
the functionality of the appliance is not
affected. Energy consumption is only
slightly increased with less distance
between the appliance and the wall.
Fit the wall spacers onto the back of
the appliance on the top left and
right.
54
Installation
Remove the cable clip from the back
of the appliance.
Check that all parts at the back of the
appliance are unhindered. Carefully
remove any hindrance.
Carefully push the wine conditioning
unit into position.
Niche floor
To ensure the safe installation of the
wine conditioning unit and to guarantee
its correct functioning, the floor of the
niche where the appliance is to be
installed must be smooth and even.
It must be made of strong, rigid
material. The wine conditioning unit is
extremely heavy when loaded and for
this reason it is imperative that the floor
is able to bear its weight. If necessary,
the advice of an architect or structural
engineer should be sought.
The weight of the appliance when
empty is approx. 145 kg.
When fully loaded, the weight of the
appliance is approx. 375 kg.
Advertisement
Table of Contents
