Preparing The Installation Niche - Miele KWT 1601 SF Operating And Installation Instructions

^ Choose the desired switching
contact and connect according to
alarm system requirements.
Output of the Home Security System on
the electronic board:
NC: normally closed
Com: common
NO: normally open
Switching capacity: 120 V/250mA
^ Continue with the appliance
installation.
30 V/1A
Preparing the installation
niche
Keep the appliance door closed
until it is securely fastened in the
niche. Tipping hazard.
If the installation niche is deeper than
the appliance, a solid wooden beam a
can be placed behind the anti-tip
brackets b so the appliance can be
securely attached to the base or wall.
The length of the wooden beam a
should be to the width of the installation
space.
If possible, always screw the
wooden beam into existing studs on
the rear panel of the niche.
Installation
45