Modifying Parameters Specific To Site Deployment; Ip Address Of Mediation Server; Number Of Fxo Ports Connected To The Pbx; Voice Coders - AudioCodes MediaPack MP-114 Quick Installation Manual

Quick Installation Guide
Click the Browse button, and then navigate to the folder that contains the ini file you want to
4.
upload.
Select the file, and then click the Open button; the name and path of the file appear in the
5.
field beside the Browse button.
Click the Send ini File button, and then at the prompt, click OK; the gateway automatically
6.
resets (from the version stored on the flash memory).
3.3.1.3

Modifying Parameters Specific to Site Deployment

Typically, for interoperability with the deployed PBX / PSTN interface and Office Communications
Server 2007, it's sufficient that you use the ini file obtained from AudioCodes' Web page. This file
contains all the required parameter settings for the gateway to seamlessly operate in this
application setup. However, due to specificity of site deployment, the following configurations may
need to be configured or modified:
IP address of Mediation Server (refer to Section
Number of FXO ports connected to the PBX (refer to Section
Voice coders (refer to Section
Numbers translation (normalization) from/to E.164 format using Manipulation tables for PBX /
PSTN connectivity - depends on deployment dial plan (refer to Section
Answer Supervision (refer to Section
Automatic Dialing (refer to Section
Caller ID (refer to Section
Version 5.0
Figure 3-8: Configuration File Screen
3.3.2.3 on page 23)
3.3.2.5
3.3.2.6
3.3.2.7 on page 30)
19
3. Configuring the MediaPack
3.3.2.1 on page 20)
3.3.2.2
on page 28)
on page 29)
4
6
on page 22)
3.3.2.4 on page 23)
September 2007