Searching For Ini File Parameters - AudioCodes MediaPack MP-114 Quick Installation Manual

Quick Installation Guide
3.1.4

Searching for ini file Parameters

The Embedded Web Server provides a search engine that allows you to search any ini file
parameter that is configurable using the Embedded Web Server. The search result provides you
with a link to the relevant Web page in which the parameter appears. You can search for a
specific parameter (e.g., 'EnableIPSec') or a sub-string of that parameter (e.g., 'sec'). If you
search for a sub-string, the Embedded Web Server lists all found parameters that contain the
searched sub-string in their parameter names. The Search button, located near the bottom of the
Main menu bar is used to perform parameter searches.
To search for an ini file parameter configurable by the Embedded Web
Server, take these 3 steps:
In the 'Search' field, enter the required name or sub-string of the ini file parameter.
1.
Click Search; the 'Searched Result' screen appears listing all searched parameter results:
2.
1
2
In the Searched Result list, click the required parameter to open the screen in which the
3.
parameter appears. In the relevant screen, the searched parameter is highlighted in green
for easy identification, as shown in the figure below.
Note:
Version 5.0
Figure 3-4: Searched Result Screen
Figure 3-5: Searched Parameter Highlighted in Screen
If the searched parameter is not located, the "No Matches Found For This String"
message is displayed.
13
3. Configuring the MediaPack
September 2007