Start/Pause And Add Clothes Touchpad; Before First Use - Zanussi ZKN71246 User Manual

16 www.zanussi.com
3.7 Start/Pause
Add Clothes
This touchpad has 2 functions:
● Start/Pause
After you have selected the desired
program and options, press this
touchpad to start the machine. The
"Start/Pause" pilot light will stop
flashing and remain lit until the water
level is above the bottom edge of the
door then pilot light goes OFF. If you
have selected a "Delay Start" option,
the countdown will begin and will be
shown in the display.
To interrupt a program which is
running, press this touchpad to pause
the machine, the "Start/Pause" pilot
light flashes.
To restart the program from the point
at which it was interrupted, press this
touchpad again, the "Start/Pause" pilot
light will stop flashing.
4.

BEFORE FIRST USE

During installation or before first use you
may observe some water in the machine.
This is a residual water left in the
machine after a full functional test in the
factory to ensure the machine is
delivered to customers in perfect working
order and is no cause for concern.
1. Ensure that the electrical and water
connections comply with the
installation instructions.
Put 2 litres of water in the detergent
2.
compartment for washing phase. This
activates the drain system.
and
● Add Clothes
Touchpad
3. Select a Cottons cycle at 90 °C,
You can only add clothes if
"Start/Pause
While running a program, you may add
clothes by:
-
Pressing the "Start/Pause
touchpad to pause the program.
-
Wait for the machine to come to a
complete stop before opening the
door.
-
Add clothing and close the door.
-
Resume the program by pressing
"Start/Pause " touchpad again.
You cannot open the door if
the water inside the machine
drum are hot, the door remains
locked for your safety.
Although the LED light still
remain lit.
without any laundry in the machine, to
remove any manufacturing residue
from the drum and tub then start the
machine.
" pilot light is lit.
"