Table of Contents
Advertisement
22
www.zanussi.com
7.
DAILY USE - WASHING & DRYING
7.1
NON-STOP program: Washing
Program + Dryness
1.
Load the laundry and add detergent
and fabric softener.
2.
Turn the knob to set a wash program
you require.
3.
Select the required options by
pressing the relevant touchpads. If
possible, do not select a spin speed
lower than that proposed by the
machine to avoid unnecessary longer
drying time therefore saving energy.
4.
Set the dryness level by pressing
"Dryness
show the whole duration of wash &
dry cycle.
5.
Start the program by pressing
Start/Pause touchpad. The time
remaining is updated every minute on
the display.
6.
At the end of the program turn the
program selector knob to the position
"Off" to deactivate the appliance.
At the end of each drying cycle,
the temperature of your clothing will
be high. For your safety, please
leave the door open to let your
clothes cool before removing your
laundry.
NOTE
●
If you wish to open the door during the
anti-crease phase or interrupt it, press
any button.
●
Some drying level options are not
available for some programs.
● When "Iron Dry
the display time will be adjusted after
approximately 15 minutes from the start
of the program, based on the laundry
type and load size. The display will
show the new adjusted time
Option
". The display will then
" option is selected,
● When "Cupboard Dry
Dry
" is selected the display time
will be adjusted towards the end of
the drying cycle when machine
senses required dryness level has
been achieved. In case of laundry
quantity lower than maximum load
capacity, the time remaining can
suddenly decrease from e.g.
approximately
NON-STOP program: Washing
7.2
Program + Dry Time
1.
Load the laundry and add detergent
and fabric softener.
2.
Turn the knob to set a wash program
you require.
3.
Select the required options by pressing
the relevant touchpads. If possible, do
not select a spin speed lower than that
proposed by the machine to avoid
unnecessary longer drying time
therefore saving energy.
4.
Set the drying time by pressing
"Dry Time
until desired drying time reached. The
display will then show the whole
duration of wash & dry cycle.
5.
Start the program by pressing
Start/Pause touchpad. The time
remaining is updated every minute on
the display.
6.
At the end of the program turn the
program selector knob to the position
"Off" to deactivate the appliance.
At the end of each drying cycle,
the temperature of your clothing
will be high. For your safety, please
leave the door open to let your
clothes cool before removing your
laundry.
NOTE
●
If you wish to open the door during
the anti-crease phase or interrupt it,
press any button.
●
If you set only 15 minutes of drying,
the appliance performs only a cooling
phase.
" or "Extra
minutes to
.
Option
" touchpad repeatedly
Advertisement
Chapters
Table of Contents
