Table of Contents
Advertisement
5.3 Options Setting
If you want your laundry to be spun or
1.
use temperature different from the one
proposed by the washer-dryer, pess the
Spin "
" and the temperature "
touchpads repeatedly to change the spin
speed and temperature. Press the
option touchpads, if you want your
laundry to be washed with special
functions.
NOTE
-
Different functions can be combined
which is dependent on the program
selected.
-
If an option is not compatible with the
wash program selected, symbol "
will flash on display along with buzzer
sound.
2.
If you want to adjust washing time, press
the "Time Adjust
repeatedly to increase or decrease
washing time. See Time Adjust guide on
page 14.
If you want to delay the start of the
washing program, press the "Delay
Start
" touchpad repeatedly to
choose your washer-dryer delay time.
5.4 Starting A Cycle (
To start a program, press the Start/Pause
touchpad. The corresponding pilot light will
stop flashing and a default program duration
will be displayed on the screen.
-
If you press any touchpad while a
program is operating, symbol "
flash on display along with buzzer sound.
(except "Start/Pause
-
If you turn the program selector knob to
another program when the machine is
working (except "Off" to switch off the
machine), symbol "
display along with buzzer sound to
indicate a wrong selection. The machine
will not perform the new selected
program.
After approx. 15 minutes from the
start of a program:
-
The appliance will automatically adjust
the selected program duration according
to the type and size of the load.
-
The display will show adjusted program
duration.
"
"
" touchpad
)
" will
" touchpad)
" will flash on
5.5 Interruption Of A Program
-
To pause, press "Start/ Pause
The indicator will start flashing.
-
Press the "Start/Pause
The program will continue.
5.6 Changing A Program
Changing a running program is possible
only by resetting it.
-
Turn the program selector knob to the
position "Off" to cancel the program
and to turn off the appliance.
-
Turn the program selector knob to the
new program position and change any
available options. Press "Start/Pause
" to start the new program.
The appliance will not drain the
water.
5.7 Changing The Options
It may be possible to change some of the
options after a wash program has started.
Press the touchpad "Start/Pause
1.
The indicator will start flashing.
If available, change the options that
2.
you wish.
Press "Start/Pause
3.
The program will continue.
5.8 Opening The Door
While a program or the Delay Start is
operating, the appliance door is locked
and the display shows the indicator "
First, set the machine to PAUSE by
pressing the "Start/Pause
Wait until the door lock indicator "
goes off, then the door can be opened.
If the door lock indicator "
disappear, this means that the machine
is already heating and the water level is
above the bottom edge of the door or the
drum is turning. In this case the door
CAN NOT be opened. If you need to
open it, you must drain the water to open
the door.
In case of emergency, please
refer to "Emergency door
opening" on page 33.
ENGLISH
19
".
" again.
".
" again.
".
" touchpad.
"
" does not
Advertisement
Chapters
Table of Contents
