Download  Print this page

Select The Temperature; Select The Delay Time; Start The Programme; Select The Desired Options - Zanussi WD1010 User Manual

Washer-dryer wd1010; wd1210
Hide thumbs

Advertisement

6. Select the temperature

Press the TEMPERATURE button if you wish to
select a temperature value different from the one
proposed by the machine.
The relevant light will light up.
7. Select the spin speed or the
RINSE HOLD (AGUA EN LA
CUBA) option
Press the SPIN SPEED (CENTRIFUGADO) button
repeatedly, in order to select the desired spin speed
or the RINSE HOLD (AGUA EN LA CUBA) option.
The relevant light will light up.
If you select the RINSE HOLD option, the machine
will stop at the end of the programme with the water
still in the tub.

8. Select the desired options

If your laundry is very dirty, it may be advisable to
select the PREWASH (PRELAVADO) option.
If you wish the laundry to undergo an extra rinse,
select the SUPER RINSE (ACLARADO ADICIONAL)
option.
Press the OPTIONS (OPCIONES) button so as to
cause one or both of the lights to light up.
If your laundry is only slightly soiled, select the
QUICK WASH (LAVADO RAPIDO) option.
The relevant light illuminates.

9. Select the DELAY TIME

Before you start the programme, if you wish the
starting to be delayed, press the DELAY
(RETARDO) button repeatedly, or keep it pressed, to
select the desired delay. The selected delay time
value (up to 24 hours) will appear on the display for 3
seconds, then the duration of the programme will
appear again.

10. Start the programme

Press the START/PAUSE button. The relevant light
will stop flashing, the DOOR LOCKED light will light
up, and only the light relevant to the phase that is in
progress will remain lit.
If you have chosen a delayed start, the machine will
begin the countdown.
The display will show the duration of the programme
or the selected delay.
11. How to change a programme
during its cycle
Before you make any change, you must pause the
machine by pressing the START/PAUSE button.
It is possible to change any phase before the
programme carries it out.
Changing the type of fabric or temperature is
possible, obviously, only during the washing phase.
When you make a change in these two parameters,
the machine will resume the cycle from the
beginning.
47

Advertisement

Table of Contents
loading

  Related Manuals for Zanussi WD1010

This manual is also suitable for:

Wd1210