BT Copier User Manual page 19

To send a fax at a pre-set time (delayed
faxing)
You can set your PaperJet 55E to send a fax
at a specific time in order to take advantage
of cheaper call rates or to allow for different
time zones.
Place document face down in the document
feeder.
If necessary set the Contrast and
Resolution settings.
Press until the display shows
Press the Start button.
Display shows
If using the 12 hour clock, press the Function
button to switch between a for
Press the < > buttons to move the cursor.
Enter the time at which you want your fax
/
to be sent, e.g. 18.30.
Display shows
NUM/TOUCH/SPEED .
You can enter a number using the keypad, one
touch or speed dial memories. For one touch,
press the appropriate keypad button until
the entry appears in the display. For speed
dial, press speed dial followed by Code No.
Refer to pages 22 to 24.
Enter the number you want.
1 2 3
19
DELAYED TX
TYPE TIME
HH:MM
AM and p for PM .
TYPE FAX NUMBER and
Press to confirm. Display shows the time at
which the fax is due to be sent
AUTOMATIC RX
TX AT 18:30
NOTE
To cancel your pre-set fax transmission, press
the Stop button or remove the document from the
document feeder.
If you want to store the document in memory
for delayed faxing, see "To fax from memory" on
page 20.
To change the details of a pre-set fax
You can set a new time and fax number.
Press until the display shows
Display shows ALREADY ENTERED
Display shows
CHANGE PARAM?
Either
Press to display CANCEL SETTING
To confirm. The fax is cancelled and your
machine returns to standby.
Or
Display shows TYPE TIME
Enter the new time at which you want your
/
fax to be sent, e.g. 19.00
Display shows
TYPE FAX NUMBER
Press to confirm. Display shows
AUTOMATIC RX
TX AT 19.00
DELAYED TX