BT Copier User Manual page 11

5 Connect the mains power
IMPORTANT NOTE
Before connecting to the mains power remove the
red tag marked "REMOVE before plugging in" by
pulling in the direction of the arrow.
Plug into the mains power and switch on.
The fax will automatically carry out a short test to
check the functions of its components and the
following messages will appear in the display:
AUTOMATIC RX
CHECK PRINT HEAD and alternating
SET DATE/TIME
Before connecting your PaperJet 55E to your PC,
complete these setting up instructions.
11
IMPORTANT
6 Load paper
The plain paper sheet feeder can hold up to 80 sheets
of 80gsm paper.
It can accommodate A4 (210 x 297mm), US Letter
(216 x 279mm), and US Legal (216 x 356mm) and
weights between 70-90gsm.
Place the paper in the sheet feeder. Do not force it in.
Use the paper width adjustment lever to push the
paper against the left side of the feeder.
NOTE
When you need to add more paper, always slide it
under the paper that's already loaded.
Maximum Level