Panasonic PN25161 Instruction Manual page 4

● Do not store and/or use this Switching Hub at a location where liq-
uid (water) may be spilled, or high humidity, conductive dust, corro-
sive gas, flammable gas is present.
Deviation could lead to fire, electric shock, and/or equipment failure.
● Do not store and/or use this Switching Hub under direct sunlight
and/or high temperature.
Deviation could lead to high internal temperature and cause fire.
● Do not store and/or use this Switching Hub at a location with contin-
uous vibration or strong shock, or at an unstable location.
The Switching Hub may fall causing injury and/or equipment failure.
● Do not put this Switching Hub into fire.
Deviation could lead to explosion and/or fire.
● Do not connect devices other than 10BASE-T/100BASE-TX/
1000BASE-T to a twisted pair port.
Deviation could lead to equipment failure.
● Use the bundled power cord (AC 100-240 V specifications).
Deviation could lead to electric shock, malfunction, and/or equip-
ment failure.
● Unplug the power cord in case of equipment failure.
Leaving failed equipment connected for a long time could lead to fire.
● Be sure to connect this Switching Hub to ground.
Deviation could lead to electric shock, malfunction, and/or equip-
ment failure.
Connect the supplied power cord into the grounded electric outlet.
If the electric outlet is not grounded, connect the grounding line
(AWG18: green/yellow) to the ground terminal screw.
● Connect the power plug firmly to the power port.
Deviation could lead to electric shock or malfunction.
4