Wipe protection
The cooktop sensors can be locked
for 20 seconds in order, for example,
to remove soiling. The sensor
control is not locked.
Activating
Touch the sensor.
The time counts down in the timer
display.
Deactivating
Touch the sensor control until the
timer display goes out.
Demonstration mode
This function enables the cooktop to be
demonstrated in showrooms without
heating up.
Activating / Deactivating
Switch the cooktop on.
Touch the 0 sensor control on any of
the numerical keybanks.
Then touch the 0 and 2 sensors at
the same time for 6 seconds.
In the timer display, flashes
alternately with (demonstration mode
activated) or (demonstration mode
deactivated) for a few seconds.
Additional functions
Displaying cooktop data
The model designation and software
version can be displayed. There must
not be any pots or pans on the
cooktop.
Model number/Serial number
Switch the cooktop on.
Touch the 0 sensor control on any of
the numerical keybanks.
Touch the 0 and 4 sensor controls at
the same time.
Numbers appear in the timer display
separated by a dash.
Example: (Model number
KM 1234) – (Serial
number)
Software version
Switch the cooktop on.
Touch the 0 sensor control on any of
the numerical keybanks.
Touch the 0 and 3 sensor controls at
the same time.
Numbers appear in the timer display:
Example: : = Software version 2.00
49